A company specializing in the production and operation of nylon

language

Home

More soft, lower water absorption, good low temperature performance and dimensional stability, oil resistance, chemical resistance, good electrical properties.

Product Characteristics:
High, medium, and low viscosity, bio-based nylon material, good toughness, low water absorption,
with good low temperature performance and dimensional stability. Oil resistance, chemical resistance, and electrical properties are good.

Main Use:
High-grade toothbrush bristle, single fiber, cable coating, mechanical manufacturing industry, oil storage container, textile machinery parts,
Electronic industry: battery shell, instrument guide rail, etc. (This product can be modified by material to meet specific performance requirements).

Product Parameters

Basic Information	Numerical (Dry State/Wet State)	Unit	Test Method
Resin identification	PA	-	ISO 1043
Identification code	>PA<	-	ISO 11469
Physical properties	Numerical	Unit	Test method
Density	1050	kg/m³	ISO 1183
Melting point	208-220	oC	--
Drying loss	≤1.0	Please translate the following text into English: ‰	--
Granularity	40-60	N/g	--
Mechanical properties	Numerical	Unit	Test method
Tensile strength	≥55	KJ/M2	ISO 527-1/-2
Bending strength	≥555	MPa	ISO 178
Tear elongation	≥100	%	ISO 527-1/-2
Bending strength of simply supported beams without notch impact	25JNB	kJ/m2	ISO 179/1eU
Injection molding*	Numerical	Unit	Test method
Resin drying (dehumidification drying)
Temperature	80	oC	-
Time	6-8	h	-
Water content	≤0.10	%	-
Melt temperature	240-260	oC	-
Mold temperature	80-100	oC	-

*It is recommended to use personal protective equipment during the injection molding process. The processing area should be well ventilated. It is recommended to clean the screw with high-density polyethylene (HDPE) before and after injection molding.

Keywords